In a message dated 3/9/2011 12:01:25 P.M. Pacific Standard Time,  
towertalk-request@contesting.com writes:
>  Im really confused.  Id like to buy Local, because  the mail order 
houses have 
Really high prices and high shipping
plus  they only do 5 or 10ft intervals.
>  I have a Glen Martin 9ft  roof mount tower.  Its just shy of 4ft from 
the rotor 
to the top of  the tower.  Right now I have
a 2 1/2" Fence Post mast (really heavy  wall) that I hold an A4S up with.
>  A4 is going bad so I  decided to get my dream antenna the standard 
SteppIR 3 
element beam and  nothing else will go on the mast.  I would
like to get 8ft as that  will give me 4ft above the tower, I can put the 
antenna 
at 2 - 3 feet and  be ok.
Hiya, Scotty --
    The 3L SteppIR isn't appreciably bigger than the  A-4 you're currently 
using. Go ahead and use what you've got.
 
    If you want to go a little higher, use 1.5"  galvanized pipe (that's 
the ID measurement - the OD is 1.9"). The SteppIR  U-clamps are very snug for 
a 2" mast so they'll work FB on a 1.9" piece of  steel. 
 
    The main factor is that it's going on a  roof-mounted tower. The tower 
will likely blow off the roof before the mast  (whatever it is) bends. 
 
Cheers,
Steve     K7LXC
TOWER TECH
and 
_www.championradio.com_ (http://www.championradio.com)   
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
 |