Towertalk
[Top] [All Lists]

Re: [TowerTalk] Interpreting symptoms

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Interpreting symptoms
From: Mike <nf4l@nf4l.com>
Reply-to: nf4l@nf4l.com
Date: Thu, 05 May 2011 09:06:11 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
That's my best guess too, Gerald.

73, Mike

On 5/5/2011 8:17 AM, TexasRF@aol.com wrote:
> Shorted/open coax feed line?
>
> Happy hunting!
>
> 73,
> Gerald K5GW
>
>
>
> In a message dated 5/5/2011 6:10:57 A.M. Central Daylight Time,
> nf4l@nf4l.com writes:
>
> My  SteppIR is exhibiting high SWR at all frequencies. Varying the length
> of the
> driven element does not affect it.
>
> If I plug only the center  conductor of the coax into the rig the noise
> level is much
> higher than  when the shield makes contact. Any SWAG's as to what this
> means the
> problem likely is?
>
> 73, Mike  NF4L
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk  mailing  list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>