Towertalk
[Top] [All Lists]

Re: [TowerTalk] Best Grease for Rotor bearings ?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Best Grease for Rotor bearings ?
From: K8RI on TT <k8ri-on-towertalk@tm.net>
Date: Sun, 09 Oct 2011 01:43:24 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 10/8/2011 11:17 PM, Tom Anderson wrote:
> OOOps, I should have qualified my answer.  I was referring to thrust 
> bearings, not the bearings inside a Yaesu rotor.  Yaesu may specify the type 
> and weight of the grease used on a rebuild.

I use White Lithium grease.  Some rotator manufacturers are using it 
now. For thrust bearings...It all depends. ROHN says to run theirs dry.

73

Roger (K8RI)
> Tom, WW5L
>
> --- On Sat, 10/8/11, Tom Anderson<andersonww5l@sbcglobal.net>  wrote:
>
>> From: Tom Anderson<andersonww5l@sbcglobal.net>
>> Subject: Re: [TowerTalk] Best Grease for Rotor bearings ?
>> To: towertalk@contesting.com, "Chris Merchant KA1LMR"<ka1lmr@yahoo.com>
>> Date: Saturday, October 8, 2011, 10:13 PM
>> Chris:
>>
>> I always use "wheel bearing" grease since its made for
>> bearings.  Same stuff mechanics supposedly use when
>> cleaning and repacking your car wheel bearings. The pros say
>> don't mix grease types like lithium with wheel bearing,
>> etc. 
>>
>> I use one of those small hand operated grease guns, usually
>> $15 or less, available at Wal-Mart or most auto supply (Pep
>> Boys, Auto Zone)stores , or tool stores such as Northern
>> Tools or Harbor Freight. They also usually have the
>> cartridges to fit both the small and large grease
>> guns. 
>>
>> Northern Tool had one of their battery powered grease guns
>> on sale a couple years ago, but I fotgot to get one.
>>
>> I pump the grease in until it comes out of the bearing and
>> usually have my XYL Cheryl (WY5H) operating the rotor
>> control box in both directions, that way the grease doesn't
>> goop up.  I always clean the excess up so it doesn't
>> attract dirt.
>>
>> I usually grease the bearing twice or so a year.
>>
>> Tom, WW5L
>>
>>
>>
>> --- On Sat, 10/8/11, Chris Merchant KA1LMR<ka1lmr@yahoo.com>
>> wrote:
>>
>>> From: Chris Merchant KA1LMR<ka1lmr@yahoo.com>
>>> Subject: [TowerTalk] Best Grease for Rotor bearings ?
>>> To: towertalk@contesting.com
>>> Date: Saturday, October 8, 2011, 7:46 PM
>>> Whats is the best grease that will
>>> not gunk up in cold New England winters for bearings
>> for
>>> repacking a  Yaesu G-800 rotor?
>>> _______________________________________________
>>>
>>>
>>>
>>> _______________________________________________
>>> TowerTalk mailing list
>>> TowerTalk@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/towertalk
>>>
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>