Another alternative is LMR-400UF, stranded center conductor like RG-8, but
better specs.
73, Dick, W1KSZ
On Wed, Oct 26, 2011 at 9:03 PM, Grant Saviers <grants2@pacbell.net> wrote:
> The solid center conductor cables are spec'd for about 20 bends at the
> specified radius. I've been told that the failure mode is particularly
> annoying - intermittent opens. So depending on your crankup up/down
> plans and how well you flake the cable for large radius bending, you may
> have a reasonable life with a solid center coax.
>
> 9913-F7 is almost identical to LMR400 so why not use it or BuryFlex for
> the up the tower run? For 2m, 70cm and higher it might be worth playing
> with LDF4 or bigger.
>
> Grant KZ1W
>
> On 10/26/2011 6:58 PM, krishna kanakasapapathi wrote:
> > Howdie folks,
> > I am installing the DB18 on a 75ft crankup. Have a roll of LMR400, the
> > solid center conductor type.
> > I thought i might just ask before i cut the cable from the roll. Any
> > possible issues with
> > using the LMR400 on a crankup?
> >
> > I have arms mounted on each of the 3 sections to keep the cables away
> > from the telescoping sections.
> >
> > 73s
> > krish
> > w4vku
> > _______________________________________________
> >
> >
> >
> > _______________________________________________
> > TowerTalk mailing list
> > TowerTalk@contesting.com
> > http://lists.contesting.com/mailman/listinfo/towertalk
> >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|