Towertalk
[Top] [All Lists]

Re: [TowerTalk] QSL card in the hole before the concrete pour

To: "'Richard Thorne'" <rmthorne@att.net>, "'Towertalk'" <towertalk@contesting.com>
Subject: Re: [TowerTalk] QSL card in the hole before the concrete pour
From: "Wes Attaway \(N5WA\)" <wesattaway@bellsouth.net>
Date: Mon, 31 Oct 2011 17:59:45 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I would cheat and throw in one that you have a duplicate of.

----------------- Wes Attaway (N5WA) ------------------- 
1138 Waters Edge Circle, Shreveport, LA 71106 
    318-797-4972 (Office) - 318-393-3289 (Cell) 
        Computer Consulting and Forensics 
-------------- EnCase Certified Examiner --------------- 

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Richard Thorne
Sent: Monday, October 31, 2011 5:44 PM
To: Towertalk
Subject: [TowerTalk] QSL card in the hole before the concrete pour

Well my concrete guy solve my problem of going square or round on the 
base of the tower, he made it square, and over sized at that.  He's 
going 4' square by 4' deep, that should hold up some tower.

I also moved my guy points out a bit.  Its an 80' tower and I had the 
guy points at 65' originally, I moved them out to 80' so it will give me 
more room to stack antennas between the 40' and 80' levels.

Now for the more important question.  If I remember correctly, I'm 
supposed to sacrifice a prized qsl card by throwing it in the bottom of 
the hole prior to the pour, correct?

Rich - N5ZC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>