Towertalk
[Top] [All Lists]

Re: [TowerTalk] 1/4 wave sloper attachment

To: towertalk@contesting.com
Subject: Re: [TowerTalk] 1/4 wave sloper attachment
From: K8RI <K8RI-on-TowerTalk@tm.net>
Date: Sun, 01 Jan 2012 17:34:04 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 1/1/2012 1:56 PM, Mike wrote:
> I need to replace the attachment for my 160/80 meter 1/4 wave sloper (fed at 
> the same
> point, attached to one leg of the tower). I'm currently using an Alpha-Delta 
> sloper
> connector, but it's in bad shape after 19 years. Suggestions?

This is what I did:
http://www.rogerhalstead.com/ham_files/tower46.htm
http://www.rogerhalstead.com/ham_files/tower47.htm An example of how it 
mounts to the tower leg.
I would add one of the 6 #31 2.4" core, 6 turn chokes at the feed point 
though.

73

Roger (K8RI)


> 73,
> Mike NF4L
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>