Jim
K8LX give you a easy to understand guide what connector to use in other email.
Ebay carry a lot of cheap DIN connectors , my recommendation is to use female
DIN in your 7/8
and use the pigtails 1/2 superflex with Male DIN to connect your antenna
switch or to get in to your house
If you want to use the DIN Connectors Lightning arrestors you will spend a
few
more bucks(HOFI) to connect direct
the pigtails are new very often on Ebay at cheaper price than a connector
alone, I cut those pigtails and install
a N or UHF connector and solve my problem
J.Hector Garcia XE2K / AD6D
Mexicali B.C DM22fp
P.O.Box 73
El Centro CA 92244-0073
http://xe2k.net
________________________________
From: Jim Miller <jim@jtmiller.com>
To: TowerTalk@contesting.com
Sent: Sun, February 12, 2012 4:42:15 PM
Subject: [TowerTalk] Andrews Heliax Conx
Wow! I spent a couple of hours today trying to figure out what 7-16 DIN
connectors to use for Andrew 7/8" heliax and I'm still confused. I suspec
this is due to Commscope taking over the Andrew line and doing some
trimming. Likely some product improvements as well. Looks like the latest
is a line called Positive Stop.
Am I on the right track? Not on the prowl for closeouts or discontinued
stuff.
tnx
jim ab3cv
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|