Towertalk
[Top] [All Lists]

Re: [TowerTalk] Romex for Rotor cable?

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Romex for Rotor cable?
From: Jim Lux <jimlux@earthlink.net>
Date: Thu, 01 Mar 2012 17:57:19 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 3/1/12 5:13 PM, Al Kozakiewicz wrote:
> If it's not hardwired to your electric service, the NEC doesn't apply.
>
>
That's not precisely true.  For instance, low voltage sprinker and 
landscape lighting is covered by NEC (Class 2 wiring, typically current 
limited), as is your rotator.  On the other hand, I'll bet most 
inspectors don't really care.

The big rule is no line voltage and low voltage in the same space 
(conduit, junction box, etc.).

But there's no rule about Type NM (Romex) in conduit...

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>