[Top] [All Lists]

[TowerTalk] RC1-H wal wart P/S ??

To: <>, "'Dave Cole'" <>, <>
Subject: [TowerTalk] RC1-H wal wart P/S ??
From: "W1JCW" <>
Date: Mon, 8 Oct 2012 20:04:54 -0500
List-post: <">>
Thanks Bill.

I thought a 24vdc ww would be hard to find. 

Where did you find the ww of voltage and what was is the current rating ??

Good info, that's what I love about this forum.


From: Bill Axelrod 
Sent: Monday, October 08, 2012 7:20 PM
To: 'W1JCW' ; 'Dave Cole' ; 
Subject: RE: [TowerTalk] RC1-H


     I use a RC-1, the Y model, for a Yaesu G-1000 rotator.  I use an
inexpensive 24 VDC wall wart for DC power so I don't have to grab any DC
power from an old control box.  Had it for 3 1/2 years so far.  It works
well and has been trouble free.

     I have used it with N1MMRotor, DX Labs DX View, and PstRotatorAz
software.  It operates seamlessly with this computer control.

73   Bill K3WA

-----Original Message-----
From: TowerTalk [] On Behalf Of W1JCW
Sent: Monday, October 08, 2012 17:17
To: Dave Cole;
Subject: [TowerTalk] RC1-H

I've been thinking about one of these for some time just haven't pulled the

>From what I've read and there are videos on you tube it seems like a nice

You need to use the power from an existing controller box which isn't a big
I would make a nice solder less connector for the power for plug and play.

Hygain has the DCU-2 unit that is $400 or so that has this integrated into
the entire box.


From: Dave Cole
Sent: Monday, October 08, 2012 8:39 AM
Subject: [TowerTalk] Same question for the RC1-H

Anyone have any experience with the RC1-H by
I am considering purchase of one of these...


TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>