Towertalk
[Top] [All Lists]

Re: [TowerTalk] Wire for prop pitch?

To: richard@karlquist.com
Subject: Re: [TowerTalk] Wire for prop pitch?
From: Frank <frankkamp@att.net>
Date: Thu, 06 Dec 2012 15:08:48 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Rick Karlquist wrote:

Frank wrote:
Richard (Rick) Karlquist wrote:

#4?  Is that a typo?  Seems a little bodacious for open wire line.
Weight should be okay since it is aluminum.

No.  I originally had the shack 1000 feet from the low
band vertical.  It's nice to have 0.1 dB loss over 1000 feet
of line on 160 meters.  They don't really sell aluminum much
smaller than #4.  The light weight is great for suspending
it.  I have been extremely pleased with this line.

BTW, 5 inch spacing gives me 450 ohms. You have to account
for the XHHW insulation.  Adds about an inch to the spacing
vs bare wire.

Rick N6RK

Sounds great.

You can buy 250 foot rolls of #17 aluminum electric fence wire. Costs about $7 a roll. Good for wire antennas. Probably not all that good for a 1000 foot run of lader line.
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>