Towertalk
[Top] [All Lists]

[TowerTalk] Caps (was: Hose Clamps)

To: <towertalk@contesting.com>
Subject: [TowerTalk] Caps (was: Hose Clamps)
From: "Jim Thomson" <jim.thom@telus.net>
Date: Sat, 2 Feb 2013 01:02:14 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Date: Fri, 01 Feb 2013 19:19:31 -0800
From: Grant Saviers <grants2@pacbell.net>
To: john@kk9a.com
Cc: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Caps (was: Hose Clamps)

Today, I took down a A4S, original Cushcraft. The 2" x 18' boom was 
filled with water, probably nearly full. The antenna was way over the 
spec 37 lb weight. All elements and the boom had end caps. 
Interestingly, the last 30 days at my San Jose QTH were unusually dry, 
less than 0.5 in of rain. The antenna was up about 8 years and is in 
good shape except slop in the boom to element stamped aluminum saddles 
which I will replace with something better. Unfortunately, birds also 
thought it was a great antenna.

Grant KZ1W

###  Been there, done that.   I had some 10 and 15m yagi’s both on 26’ booms,
with end caps.  They were  both completely full of water when I took em down. 
Talk
about HEAVY. 

## same deal with eles.  You get water in the els, the tips droop a bit.. then 
the water is stuck
there.  They they freeze,  tips  explode from the expanding ice.    I don’t cap 
anything, booms or els,
not here in the pacific north west.   The only thing you want to cap off is the 
top of a mast. 

Jim  VE7RF

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>