Do you have a part number?
73
Jim W7RY
On 10/13/2013 6:44 PM, Mark Robinson wrote:
As another option, I believe that cadweld sells a form designed to
work with copper strap and circular copper clad ground rods
Mark N1UK
----- Original Message ----- From: "Mark Robinson"
<markrob@mindspring.com>
To: "Ray Benny" <rayn6vr@cableone.net>; "TowerTalk"
<TowerTalk@contesting.com>
Sent: Sunday, 13 October, 2013 9:41 PM
Subject: Re: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod
I preformed the copper strap around half of the copper clad ground
rod and silver soldered the strap to the rod.
Mark N1UK
----- Original Message ----- From: "Ray Benny" <rayn6vr@cableone.net>
To: "TowerTalk" <TowerTalk@contesting.com>
Sent: Sunday, 13 October, 2013 5:47 PM
Subject: [TowerTalk] Connecting Flat Copper to 5/8" Ground Rod
Has anyone come up with a way to connect flat copper straps to
ground rods?
DXXE sells copper clamps w/ hardware, but at $35 a pop, I hoping
that there
is a more reasonable way to get the job done.
My copper strap is 2" wide, by 6ft, and about 18 ga, but not sure.
Tnx,
Ray,
N6VR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|