On 12/9/13 9:37 PM, Peter Voelpel wrote:
I use EPCOS surge arresters everywhere.
http://electronicdesign.com/components/stack-component-combines-epcos-surge-
arresters
http://www1.futureelectronics.com/doc/EPCOS/Epcos%20T61-C350X.pdf
73
Peter
Gas discharge tubes (at least the second link is).
Most semiconductor circuits will actually take a short 100V transient,
as long as there's sufficient series resistance to limit the current.
It's not a whole lot different than ESD tolerance.
It's things where there's things like microprocessor pins directly
connected to the outside world that are sensitive.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|