Towertalk
[Top] [All Lists]

Re: [TowerTalk] K0XG

To: towertalk@contesting.com
Subject: Re: [TowerTalk] K0XG
From: David Robbins <k1ttt@verizon.net>
Reply-to: k1ttt@arrl.net
Date: Wed, 26 Feb 2014 13:38:35 -0600 (CST)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
what does the new pot look like... had mine replaced once because the bushing 
seized up, but the replacement was the same as the original which can be seen 
at: http://wiki.k1ttt.net/2012%20Maintenance%20and%20Upgrade%20Blog.ashx#k0xg

the only problem with going to the magnetic pulse thing is he apparently has 
had 2 different motors, one has the tail shaft, the other doesn't, and he 
doesn't know which one I have.... and I never took the cover off to look before 
I installed it.


Feb 26, 2014 02:30:12 PM, KB1H@ct.metrocast.net wrote:

Hmmm.. just had a failure and replacement pot sent. Maybe I should have gone 
with the relay/magnet. New pot looks much different than the original

Dick - KB1H


-----Original Message----- 
From: Tim Duffy
Sent: Wednesday, February 26, 2014 1:57 PM
To: k1ttt@arrl.net ; towertalk@contesting.com
Subject: Re: [TowerTalk] K0XG

I use the pulse counters on my K0XG rings with Green Heron controllers and
they work flawless.

73,
Tim K3LR

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of David
Robbins
Sent: Wednesday, February 26, 2014 1:46 PM
To: towertalk@contesting.com
Subject: Re: [TowerTalk] K0XG

I prefer pots, but the way he does them doesn't work in my icy
environment... so I found he has both and he sent me a kit to put in a
magnet/relay for pulse counting. now I just have to get up there and hope
the motor has the tail shaft to put it on.


Feb 26, 2014 01:27:27 PM, jim.thom@telus.net wrote:

Date: Wed, 26 Feb 2014 11:58:24 -0500 (EST)
From: Cqtestk4xs@aol.com
To: TOWERTALK@contesting.com
Subject: [TowerTalk] K0XG

A tip of the hat to K0XG rotating tower systems....fast service.

I called Richard Thursday evening needing a replacement pot. He sent it
out the next day, with no payment needed until I received it. I got it
Tuesday and all is good.

This is how companies should be run.

Disclaimer: I have no financial interest in this company.

Bill K4XS

## why are they still using pots ? Why not digital pulse train ?

Jim VE7RF


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>