On 4/20/2014 10:14 AM, Larry wrote:
FWIW, I used 450 feet on a KenPro KR2000 (KenPro sold their rotator
line to Yaesu and the KR2000 is the same as G2800(?)) for years
without problems. I used the stuff with a pair of #14 conductors.
Yes. Ohm's law still works. :) I have a long run to a Yaesu rotor
(about 350 ft) that is #14 house wire for the pair that runs the motor,
and smaller conductors for the position sensing resistor.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|