[TowerTalk] Common-mode choke

Towertalk

[TowerTalk] Common-mode choke

from [GW4BLE]

To:	<towertalk@contesting.com>
Subject:	[TowerTalk] Common-mode choke
From:	GW4BLE <steve.gw4ble@btconnect.com>
Date:	Sun, 18 May 2014 19:15:02 +0100
List-post:	<towertalk@contesting.com">mailto:towertalk@contesting.com>

Hi,

Need to make common-mode choke to give maximum impedance at 28 MHz, coax is 
RG-213, but unsure of Fair-Rite part number for mix-43 toroids (order would be 
to mouser, so an appropriate part number from them?).

I've read the YCC article (2006?) by W1HIS), but needed clarification. 

Any advice appreciated.

Thank you 


Steve
GW4BLE

Sent from my iPhone 5S
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Common-mode choke, GW4BLE <= Re: [TowerTalk] Common-mode choke, Drax Felton Re: [TowerTalk] Common-mode choke, GW4BLE Re: [TowerTalk] Common-mode choke, Marsh Stewart Re: [TowerTalk] Common-mode choke, Steve Hunt Re: [TowerTalk] Common-mode choke, Jim Brown Re: [TowerTalk] Common-mode choke, Steve Hunt Re: [TowerTalk] Common-mode choke, Jim Lux Re: [TowerTalk] Common-mode choke, Steve Hunt Re: [TowerTalk] Common-mode choke, Jim Brown Re: [TowerTalk] Common-mode choke, Steve Hunt

Previous by Date:	[TowerTalk] FW: Beverage Layout Problem, Matt
Next by Date:	Re: [TowerTalk] Common-mode choke, Drax Felton
Previous by Thread:	[TowerTalk] Vertical with 1 radial, Tom Osborne
Next by Thread:	Re: [TowerTalk] Common-mode choke, Drax Felton
Indexes:	[Date] [Thread] [Top] [All Lists]