Mineral oil with an antioxidant will work fine - or using straight mineral
oil. Canola would work although also has problem of going rancid. But you
can change it cheaply
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Pete
Smith N4ZR
Sent: Saturday, November 28, 2015 12:26 PM
To: TowerTalk <TowerTalk@contesting.com>
Subject: [TowerTalk] Oil for Dummy Load
My Cantenna-type dummy load developed a pinhole leak in the can, and all the
mineral oil drained out. I have several gallons of clean (unused) peanut
oil left over from Thanksgiving. Is there any reason not to use this
instead? From internet sources, the flash point appears to be higher than
mineral oil.
--
73, Pete N4ZR
Download the new N1MM Logger+ at
<http://N1MM.hamdocs.com>. Check
out the Reverse Beacon Network at
<http://reversebeacon.net>, now
spotting RTTY activity worldwide.
For spots, please use your favorite
"retail" DX cluster.
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|