Towertalk
[Top] [All Lists]

Re: [TowerTalk] Can´t add egg insulator...

To: "Douglas Ruz (CO8DM)" <co8dm@frcuba.co.cu>
Subject: Re: [TowerTalk] Can´t add egg insulator...
From: Stan Stockton <wa5rtg@gmail.com>
Date: Mon, 14 Dec 2015 20:30:16 -0600
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Doug,

See if you can find larger rope.  What you have might be OK but personally I 
would want to have a better base than I think you probably have, particularly 
because I envision that if it came over there would be damage that would be 
more than just the tower.

Stan, K5GO

> On Dec 14, 2015, at 7:24 PM, Douglas Ruz (CO8DM) <co8dm@frcuba.co.cu> wrote:
> 
> I have PARACORD 550 black color...but it is 1/4" diameter and support up to 
> 550 pounds only...i think single is to small...what about double ?
> 
> 73....Douglas, CO8DM
> 
> "No creo que haya alguna emoción más intensa para un inventor que ver alguna 
> de sus creaciones funcionando. Esa emoción hace que uno se olvide de comer, 
> de dormir, de todo." - Nikola Tesla
> ----- Original Message ----- From: "Stan Stockton" <wa5rtg@gmail.com>
> To: "Douglas Ruz (CO8DM)" <co8dm@frcuba.co.cu>
> Cc: <john@kk9a.com>; <towertalk@contesting.com>
> Sent: Monday, December 14, 2015 7:59 AM
> Subject: Re: [TowerTalk] Can´t add egg insulator...
> 
> 
> At risk of purists saying absolutely not, if I were going to put up just 30 
> feet of 25G tower and didn't have all the proper materials to insulate the 
> guy wires and guy it as would normally be done, I wouldn't hesitate for a 
> moment to put two levels on that small tower using 3/8" diameter polyester 
> (Dacron) low stretch rope. The antenna will blow apart first eliminating a 
> potential problem and rope doesn't rust.
> 
> Stan, K5GO
> 
> Sent from Stan's IPhone
> 
> 
> 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>