Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rotator Choice for Larger Yagi

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Rotator Choice for Larger Yagi
From: "Roger (K8RI) on TT" <K8RI-on-TowerTalk@tm.net>
Date: Mon, 25 Apr 2016 21:08:31 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mine is the earlier version with the AC motor. I don't know if the mechanical part of the new version has addressed the faults listed below or not.

I was using a PST61 on the array shown. http://www.rogerhalstead.com/ham_files/Tower29.htm . It worked fine except for the top seal design captured water causing the output shaft to rust which destroyed the seal letting water into the rotator. A friend turned down the output shaft to get rid of the rust pits, so a slightly overs size seal worked just fine. That too is shown in the rebuilding link.

Beside the top seal design which can be worked around, I was made aware of the rotators main weakness being the bottom attachment to the mount being only 4 bolts shown in photo 21 in http://www.rogerhalstead.com/Gears.htm Everything in the rotator is heavy duty (as shown in the rebuilding photos), "except" for those 4 bolts. I had no problems, but some others have had serious problems with large antennas.

The rotator is rated for 44 sq ft of antenna wind area, but I have my doubts as to those 4 bolts in that mount. I like the way the PST61 works, but it does have a few short comings. OTOH, I think I'd go with the Alphaspid, or possibly the big (I think it's the PST71) for the large antenna.

73 es good luck!

Roger (K8RI)


On 4/25/2016 Monday 3:14 PM, john@kk9a.com wrote:
Nice antenna! I'm a big fan of prop pitch rotators.

John KK9A

To:     towertalk@contesting.com
Subject:        [TowerTalk] Rotator Choice for Larger Yagi
From:   Jerry Gardner <jerryw6uv@gmail.com>
Date:   Mon, 25 Apr 2016 11:00:22 -0700


Hi Tower Talkers

I'm planning to replace the TH-7DX on my tower with an Optibeam OB17-4,
which is a much larger antenna. I'm now looking at my options with regard
to rotators beefy enough to handle this antenna (~27 sq. ft. wind area).

Which of these would be sufficient to handle an OB17-4? Alfaspid RAK (the
rotator currently on the tower), an Alfaspid Big RAK, or a Prosistel PST61.
I don't need a controller as I already have a Green Heron RT-21.

Thanks,
Jerry

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


--

73

Roger (K8RI)


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>