Towertalk
[Top] [All Lists]

[TowerTalk] Crimp Connector Tools?

To: Tower Talk Mailing List <towertalk@contesting.com>
Subject: [TowerTalk] Crimp Connector Tools?
From: Eric Rosenberg <ericrosenberg.dc@gmail.com>
Date: Sat, 14 May 2016 11:45:23 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I suffer from significantly diminished fine motor skills and proprioception (the sense of the relative position of neighboring parts of the body and strength of effort being employed in movement) of my left hand, and am unable to install solder-on connectors.
In light of the fascinating discussion of connectors, I have the 
following question regarding the installation of connectors on RG-8X, 
RG-213, LMR-240, LMR-400 and "Buryflex" (DavisRF or DX Engineering) 
cables. I'm not sure which ones I'll be using as I re-build my station 
this summer.
Who are the recommended connector manufacturers of crimp-on connectors 
for these different size cables, and what tools do I need to install 
them. I've noted that ratcheted crimpers range from $15 to $400, and 
that Times Microwave makes their own connectors and tools for their LMR 
series cables.
While I acknowledge that there is often a direct correlation between 
cost and quality, this is an instance where I need guidance.
Thanks & 73,
Eric W3DQ
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>