Towertalk
[Top] [All Lists]

Re: [TowerTalk] PL 259 crimp connectors for RG 400

To: Mark Spencer <mspencer12345@yahoo.ca>
Subject: Re: [TowerTalk] PL 259 crimp connectors for RG 400
From: Mike Reublin NF4L <nf4l@comcast.net>
Date: Tue, 7 Jun 2016 19:05:45 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Mark -

I've been pleased with connectors from http://www.davisrf.com/rf-connectors.php

They have generic and Amphenol. If the connectors came from the same vendor as 
the coax and doesn't fit, it could be the "generic" coax that's off. In any 
case, they should fix it.

73, Mike NF4L

> On Jun 7, 2016, at 2:55 PM, Mark Spencer via TowerTalk 
> <towertalk@contesting.com> wrote:
> 
> Hi does anyone have any recent experience buying generic PL 259 style crimp 
> connectors for RG 400 style cable and if so could they share their vendor 
> contract info with me ?
> 
> My last few batches of generic connectors have had centre pins which are to 
> small for the RG 400 centre conductor.   I would prefer a generic connector 
> for this application vs a pricey name brand one.   I'm making up some patch 
> cords for portable work and they may only last a for a few outings.   
> 
> I'm using generic RG400 cable which may also be part of the issue.   The 
> cable and connectors were sourced from the same vendor.
> 
> Plan B is to simply drill out the centre pins of the connectors that I have.  
>  I already have the RG 400 sized ferrules.
> 
> Thanks in advance
> Mark S
> VE7AFZ
> 
> 
> Sent from my iPhone
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>