one of the Belden data sheets has the cladding thickness. we were also looking
to characterize the z of snow antenna made from plated piano wire.
I just can't remember what the numbers are off the top of my head
Sent via the Samsung Galaxy S®6 active, an AT&T 4G LTE smartphone
-------- Original message --------From: Jim Brown <jim@audiosystemsgroup.com>
Date: 8/6/16 10:02 AM (GMT-08:00) To: towertalk@contesting.com Subject: Re:
[TowerTalk] Coax Losses on 160 and 75?
On Sat,8/6/2016 6:58 AM, jimlux wrote:
> So it depends on what kind of copper clad steel they're using in the
> coax.
Hi Jim,
I've not measured loss in copper clad coax, I'm going from Belden data
sheets.
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|