are you sure you're not confusing winds with storms? My understanding was
that it should be retracted if there is any chance of lightning greatly
reducing the exposed area.
g.
-----Original Message-----
From: Jeff Draughn
Sent: Sunday, August 21, 2016 12:23 AM
To: john@kk9a.com
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] Rotator and Beam advice requested
As I understand it, the purpose behind retracting the elements (copper
beryllium tapes) during high winds is to prevent damage to the tape if the
elements movement should become too violent or if a fiberglass element
housing should be damaged or just fall off. The tape could be damaged or
unable to retract.
Jeff, N0OST
On Saturday, August 20, 2016, <john@kk9a.com> wrote:
There may be some reason, but I do not know what it is. I stayed at
AI6V's
(sk) QTH in Aruba a few times and he requested that I retract the elements
of his 4 element StepIR after use. Unfortunately the elements quit
extending
and the antenna has not been used in years.
John KK9A
To: Chris Hoelzle <choelzle@cox.net <javascript:;>>
Subject: Re: [TowerTalk] Rotator and Beam advice requested
From: Stan Stockton <wa5rtg@gmail.com <javascript:;>>
Date: Fri, 19 Aug 2016 20:19:35 -0500
I thought a StepIR had some kind of conductive flexible tape on inside of
fiberglass. If so, what's up with retracting elements to reduce wind
load?
Stan, K5GO
Sent from Stan's IPhone
> On Aug 19, 2016, at 7:44 PM, Chris Hoelzle <choelzle@cox.net
<javascript:;>> wrote:
>
> Hello All. I am putting up a 80 foot Rohn 55G. I am in a 115 mph wind
zone.
>
>
>
> I need Beam advice - I have just about settled on a StepIR DB36. Even
though
> the specs show 100 mph for the beam, in talking to the factory, I am
> told
> "it will be fine" as long as you retract the elements in high wind. Is
that
> true or should I go a different direction?
>
>
>
> I like the simplicity of the StepIR as my alternative will be multiple
beams
> and ring rotators and all that fun.
>
>
>
> Second question - Assuming I go with the 55G and the DB36, can anyone
guide
> me to a good reliable rotator that I won't have to rebuild every year.
>
>
>
> Thanks so much
>
>
>
> NN6CH
>
> Chris Hoelzle
> choelzle@cox.net <javascript:;>
> Laguna Niguel, CA
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com <javascript:;>
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|