Re: [TowerTalk] Self Supporting Tower Install

[Patrick Greenlee <patrick_g@windstream.net>]

I was given the option of a rectangular rebar cage intended for a 4x4x8 
ft hole or a rebar cage intended for a round 5 ft diameter hole 8 ft 
deep.  I found 2 sources for the round hole drilling. The less expensive 
one wanted over $2000 to drill the hole and I would be responsible for 
replacing any teeth on his tool if any were damaged and if he got stuck 
at my tower site I was responsible for paying to get him out.
An experienced local operator dug my rectangular hole with a back hoe 
for $85.
The round hole may have been more perfect but after struggling through 
about a millisecond of internal debate  I chose the backhoe.
Patrick        NJ5G



On 5/11/2017 11:00 PM, jimlux wrote:
> On 5/11/17 8:33 PM, Lee K. Brown MD via TowerTalk wrote:
> > I recently moved my US Tower crank-up from my old QTH to my new QTH,
> > While the tower had been originally installed with the usual
> > rectangular concrete base specified by the P.E. that US Tower used to
> > wet stamp the plans for me, the P.E. that I engaged for the
> > re-install locally specified a cylinder of concrete. Apparently not
> > unusual at all.
> there's a well developed process for drilling round holes (caissons) for
> supports for things like traffic lights, etc. A machine comes out and
> drills a 3-4 foot diameter hole, you drop the rebar cage in, fill with
> concrete, etc.
>
> Works nicely in places without a lot of room (e.g. a sidewalk), if you 
> make the column deep, it can support an enormous moment (there's 
> several traffic signals spanning 3-4 lanes near my house doing this, 
> the cantilever loads must be huge with a fairly heavy left turn signal 
> hanging out 4 lanes in)
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk