Towertalk
[Top] [All Lists]

[TowerTalk] Antenna Windload Ratings & Tower Windload ratings

To: towertalk@contesting.com
Subject: [TowerTalk] Antenna Windload Ratings & Tower Windload ratings
From: Kurt Andress <andresskurt@gmail.com>
Reply-to: kurt@k7nv.com
Date: Mon, 12 Jun 2017 23:32:08 -0700
List-post: <mailto:towertalk@contesting.com>
The recent discussions here are all informative from those that actually know what is going on!
Everyone needs to understand this one principle:
The professionals that design towers are beholden to do that according to the most recent standard that clearly defines what they do, when they design a tower. All of your antenna builders have absolutely no idea of what those standards are! Few, if any of them, have mechanical engineers capable of understanding those requirements....they are amateurs building what they think you will decide you will buy....that is marketing, not engineering!

I have studied and and documented this disconnect for over 30 years......it absolutely drives me nuts! The bottom line is that none of you can use any of the antenna manufacturers antenna area ratings with any of your towers, because they are not determined by the clearly defined standards that your tower designers use, because there is no real engineering expertise at any antenna manufacturer that is aware of what the Pro Tower designers do. And on top of that, few of the antenna suppliers and tower designers actually define the antenna area measurements their products service...... are they projected areas, or are they effective areas? These are all defined in the EIA/TIA 222 spec....I know what they are for each tower builder, because I have been into their detailed design analyses. They are usually citing antenna projected areas! What are your antenna builders citing? Rohn engineers are very clear about what they are citing! I have lots of analyses of commercially built amateur antennas, made from their own manuals, most all of them are simply WRONG, and not the least bit useful for deciding what can be put on a current professionally designed tower! I have no interest in becoming involved with the usual TT pundit shitfights. I just feel it is incumbent on me to come around about once every decade to remind everyone that this is still a huge unresolved problem, just like it was ~25 years ago, when I first looked into it....

73, Kurt, K7NV
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>