Towertalk
[Top] [All Lists]

Re: [TowerTalk] Crappy LMR600

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Crappy LMR600
From: Clay Autery <cautery@montac.com>
Date: Wed, 23 Aug 2017 15:41:10 -0500
List-post: <mailto:towertalk@contesting.com>
Curious as to why y'all don't use the LMR-400-DB or LMR-xxx-DB cable
INTENDED for exterior use?

______________________
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389

On 8/23/2017 3:04 PM, Mike & Becca Krzystyniak wrote:
> Bill  etal,
>
> I had some LMR-600-UF going to several UHF antennas on a rotating tower.  
> It showed signs of sun damage and the outer jacket crinkle cracked on me
> too.  
> The salesman warned me upfront it might not make 10 years.
>   
> But even cracked with some exposure to the shield, the integrity of the coax
> (loss & Z) was still in spec.
> IIRC, I actually found a footnote on the LMR site that UF was not intended
> for outdoors, but it will survive for a number of years.
>
> Bill, YMMV but the Jafa-Tek specs are not the same as LMR-xxx.  
> But for jumpers it's probably in that bucket called diminishing returns.
>
> I have also used SuperFlex in rotor loops but over time I had one crack
> along the annular shield rings, opening the shield.  
> Not sure if that was a one off, or something attributable to the SuperFlex
> construction.  
> At the time I decided to replaced them all but I am reconsidering SF vs. UF.
>  
> Mike K9MK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>