This sounds like a god plan to me. You have to get the nut off anyway if you
get a new nut. Worth a try to see if you can break it loose and keep the nut.
A lot cheaper too hihi
BobK6UJ
----- Forwarded Message -----
From: Wilson Lamb <infomet@embarqmail.com>
To: towertalk <towertalk@contesting.com>
Sent: Wednesday, April 4, 2018 9:49 AM
Subject: [TowerTalk] adjustment Nut
Soak heavily in magic juice.
Maybe wrap in a rag to maintain concentration of juice.
Get cheap box end or socket wrench.
Make torque pulses with hammer or impact wrench.
Repeat.
It seems like there would be an electrolytic way to do this, but I don't know
it.
WL
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|