Several people have mentioned the effects of a hill on a vertical or vertical
system.
I also know of no program that allows terrain to be considered for a vertical.
Several people who I consider informed came to the same conclusion I did, it
enhances the signal if it is a downhill slope and is detrimental if is an
uphill slope. For example, if one looks at a Yagi at one wavelength over flat
ground and then at one over sloped terrain, you can see how the angle has
dropped. Likewise, if you look at the flat results and then the print out of
the uphill slope, it is easy to see the low angle has been attenuated.
It's my belief and some antenna gurus, that the steeper the slope, the lower
the angle if down slope, and the more attenuated if up slope.. At my QTH I
have a huge downward slope to EU and NA and a huge up slope to the top of Mauna
Kea (14000 feet) which is LP for EU and SP for VK/ZL. On 80 I have a 4 sq and
on 160 a bent vertical and a very good symmetrical ground system. For the same
conditions and distances I can tell you the signal is much better in the
direction of the down slope than the up slope. Is it a scientific test? No.
However, it does indicate that if one has a big slope (in my case a 1:6 slope
uphill and downhill.) it does affect how a vertical performs. Mine and several
others educated guess? Going downhill at my place probably lowers the angel at
least several degrees. No, I'm not sure if the angle is elevated in the up
hill direction. No doubt though it is attenuated.
Those who have heard me on 80 and 160 in EU and NA will agree that the down
slope helps the signal.
Bill KH7XS/K4XS
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|