Towertalk
[Top] [All Lists]

Re: [TowerTalk] TIC Rotor Controller

To: Chris Hurlbut <chriskl9a@gmail.com>
Subject: Re: [TowerTalk] TIC Rotor Controller
From: Steve Muenich via TowerTalk <towertalk@contesting.com>
Reply-to: Steve Muenich <srmuenich@gmail.com>
Date: Mon, 6 Apr 2026 09:37:38 -0500
List-post: <mailto:towertalk@contesting.com>
Chris et al;

I have a spare GHE RT21-DC I’m gonna be putting up for sale. This is a DC 
powered only controller with Ethernet port. If anyone is interested let me 
know. 

Steve, NA5C


Sent from my mobile device

> On Apr 6, 2026, at 9:30 AM, Chris Hurlbut via TowerTalk 
> <towertalk@contesting.com> wrote:
> 
> Thanks everyone for the replies.
> 
> Yes, GHE is probably the correct answer at some point.  I just need to find
> more change in the couch cushions!
> 
> -Chris KL9A
> 
>> On Mon, Apr 6, 2026 at 7:14 AM <john@kk9a.com> wrote:
>> 
>> Chris
>> 
>> My mistake, K3MM's post reminded me that all of my controllers had analog
>> displays.  As I stated it had been decades since I used the TIC controller.
>> The control box looked very similar to yours and nothing like the one shown
>> in the manual.  The analog display was very inaccurate and really was only
>> useful to show movement.
>> 
>> There are many variations of TIC ring rotators.  If yours uses the German
>> wiper motor I have been selling these motors on swap qth.
>> 
>> 73
>> John KK9A
>> 
>> 
>> -----Original Message-----
>> From: john@kk9a.com <john@kk9a.com>
>> Sent: Sunday, April 5, 2026 10:55 PM
>> To: 'towertalk@contesting.com' <towertalk@contesting.com>
>> Subject: re: [TowerTalk] TIC Rotor Controller
>> 
>> Chris
>> 
>> I recently sold seven TIC ring rotators that I owned for 30-40 years.  All
>> came with the digital controller shown in your photo where you set the
>> direction and press start.  I know at least some of my manuals showed the
>> controller that your manual has a photo of but I have never seen a
>> controller that looked like that.  It really shouldn't matter as long as it
>> supplies 24v for the motor and indicates the direction from the 500 ohm
>> potentiometer.
>> 
>> FWIW, I quit using the TIC controllers 20 years ago and used Green Heron
>> RT-21's.
>> 
>> John KK9A
>> 
>> 
>> 
>> 
>> Chris Hurlbut KL9A wrote:
>> 
>> My controllers say the model number is 2020.
>> They look nothing like the 2020 pictured in the manual I can find online.
>> 
>> They do look like a digital readout version of a 2100.
>> See photos at the following link:
>> 
>> https://photos.app.goo.gl/2LBex7fV1cFAt8vR6
>> 
>> Does anyone know what the deal is here?
>> I know that reverse engineering anything TIC related requires some mental
>> gymnastics, but these units look nothing alike!
>> 
>> Thanks,
>> Chris KL9A
>> 
>> 
>> _______________________________________________
>> 
>> 
>> 
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>> 
> _______________________________________________
> 
> 
> 
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>