Hi Bernie,
not sure to understand your question correctly.
Any way, did you checked the correct ICOM address??
It is HEX 26 for DX4WIN so should be Decimal 48 for TRlog.
May be this helps.
GL
Bob,I2WIJ - J49WI
mailto:i2wij@qsl.net
http://www.qsl.net/i2wij/
-----Original Message-----
From: Bernie, CMS [mailto:bernie@internext.co.za]
Sent: Monday, February 14, 2000 2:45 PM
To: trlog@contesting.com
Subject: [TRLog] .cfg file for 781
Hi,
New user: I need a sample config file to make my IC781 sing along with
TRlog.
The 781 works fine with DX4WIN and the CW keying from TRlog to the 781 via
COM 2 is also OK.
Thanks
Bernie
ZS4TX
PS: A quick look at the archives did not bring up any answers.
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|