[TRLog] Cabrillo for M/2

[whhendrick@home.com (William Hendrick)]

> It's in the Cabrillo spec - a number (0 or 1) at the end of the QSO
> entry.
>
> Someone told me this was working with TR - but it has been over a
> year since I looked at it.  You probably need to have the
> computer ID setup to show A or B for each rig.
>
> Tree

It must not be working with v 6.57. I just looked at the Cabrillo file and
there are no 0/1s indicating TX1/TX2. Here is an example of Cabrillo output
for ARRLCW

QSO: 28000 CW 2001-02-17 0008 N0NI          599 Ia     JH6TYD        599 100
QSO: 21000 CW 2001-02-17 0011 N0NI          599 Ia     T32RD         599 400
QSO: 21000 CW 2001-02-17 0011 N0NI          599 Ia     8P5A          599 K
QSO: 21000 CW 2001-02-17 0013 N0NI          599 Ia     JA1IRH        599 050
QSO: 28000 CW 2001-02-17 0014 N0NI          599 Ia     RZ0IWA        599 100
QSO: 28000 CW 2001-02-17 0015 N0NI          599 Ia     PY1NX         599 100
QSO: 21000 CW 2001-02-17 0015 N0NI          599 Ia     JJ0FVP        599 100

Let me restate the question to the M/2s:

If you run separate TX on different bands and rather than switching only
bands you switch TX which is on a different band how would you go about
identifying TX1/TX2? You have 4 TX which can go to any band.

N0AC


--
FAQ on WWW:               http://www.contesting.com/FAQ/trlog
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html