Hi Pete
>
> So then I read in the change message that 6.59 will "allow control
> characters to be specified for function key memories in the config file
> (using the above syntax). These will not work if you use the Alt-P command."
>
> I presume this to mean that I must edit the logcfg.dat file with an editor
> that permits direct entry of Ctl-C, Ctl-D, and so on.
** Can do it that way but easier to put the following line in
config file.
(whatever EX or CQ memory you are using) =
<03>SRS1=<00><00><00><30><75><04>
> Correct? If so, is
> there a freeware or shareware editor that I can obtain that will let me do
> this.
>
* http://www.winhex.com/winhex/index-m.html
> Also, can anyone confirm that the following is the correct sequence for
> turning off the receive EDSP? -- <00><00><00><30><75>
* Don't know. Haven't tried it.
Does it then follow
> that the correct string for sending this to Radio 1 would be
> Ctrl-C SRS1=<00><00><00><30><75> Ctrl-D?
No, CTRL characters are entered as hex codes too.
<03>SRS1=<00><00><00><30><75><04>
73 de Jim Smith VE7FO
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|