This is a method that will work only with Win 98 and it s derivatives like
ME. It will NOT wok with WIN2000, WIN N/T or XP, since there is no DOS with
these.
Much better with any of them is to simply make a DOS BOOT diskette with
WIN98 making a WIN98 startup disk.
Of course you need access to WIN98 to do it.
'
> -----Original Message-----
> From: trlog-admin@contesting.com [mailto:trlog-admin@contesting.com]On
> Behalf Of Alan Clark
> Sent: Tuesday, June 04, 2002 11:52 AM
> To: trlog@contesting.com
> Subject: [TRLog] Mark-V Working 100%
>
>
> I finally got my computer totally controlling my Yaesu FT-1000MP
> Mark-V. In
> Windows 98 there is a file called C:\MSDOS.SYS. First you must
> right click
> on this file with your mouse. Then you select "Properties". On
> the bottom
> of the window is a section called "Attributes" . You must un-mark
> "Read-only" and "Hidden" and press the Apply button. Now you can edit
> C:\MSDOS.SYS with Notepad. Once you have the file up in your
> editor, change
> the line BootGUI=1 to BootGUI=0. Then add a line LOGO=0. Save
> the file and
> exit the editor. Now you must right click on the file and change the
> Attributes back to "Read-only" and "Hidden". Now you can reboot
> the PC. It
> will boot up in a true DOS mode. Starting TRLog you now have full control
> of the rig, providing you have the proper configuration file. If you want
> to enter Windows, simply key in the word "win" at a C:\ prompt and press
> enter. If you enter Windows and want to go back into TRLog, press the
> "Start" button, the "Shut Down" option and take the "Restart" option, not
> the "Restart in MS-DOS Mode" option. Thanks for all the input
> from all you
> guys. Hope to see some of you at Ham-Com this weekend.
>
> 73's
> Alan, N5PA
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
|