Actually, even without access to Windows 98 you can go to
http://www.bootdisk.com/ to find a boot disk. if you run 2000/XP, etc. this
works as long as your drive is not NTFS. If you left it as FAT, then it will
work. DOS cannot read/write an NTFS disk without a 3rd party utility.
Tom NY4I
----- Original Message -----
From: "Gil Baron" <gbaron@charter.net>
To: <n5pa@arrl.net>; <trlog@contesting.com>
Sent: Tuesday, June 04, 2002 12:02 PM
Subject: RE: [TRLog] Mark-V Working 100%
> This is a method that will work only with Win 98 and it s derivatives like
> ME. It will NOT wok with WIN2000, WIN N/T or XP, since there is no DOS
with
> these.
>
> Much better with any of them is to simply make a DOS BOOT diskette with
> WIN98 making a WIN98 startup disk.
>
> Of course you need access to WIN98 to do it.
>
> '
>
> > -----Original Message-----
> > From: trlog-admin@contesting.com [mailto:trlog-admin@contesting.com]On
> > Behalf Of Alan Clark
> > Sent: Tuesday, June 04, 2002 11:52 AM
> > To: trlog@contesting.com
> > Subject: [TRLog] Mark-V Working 100%
> >
> >
> > I finally got my computer totally controlling my Yaesu FT-1000MP
> > Mark-V. In
> > Windows 98 there is a file called C:\MSDOS.SYS. First you must
> > right click
> > on this file with your mouse. Then you select "Properties". On
> > the bottom
> > of the window is a section called "Attributes" . You must un-mark
> > "Read-only" and "Hidden" and press the Apply button. Now you can edit
> > C:\MSDOS.SYS with Notepad. Once you have the file up in your
> > editor, change
> > the line BootGUI=1 to BootGUI=0. Then add a line LOGO=0. Save
> > the file and
> > exit the editor. Now you must right click on the file and change the
> > Attributes back to "Read-only" and "Hidden". Now you can reboot
> > the PC. It
> > will boot up in a true DOS mode. Starting TRLog you now have full
control
> > of the rig, providing you have the proper configuration file. If you
want
> > to enter Windows, simply key in the word "win" at a C:\ prompt and press
> > enter. If you enter Windows and want to go back into TRLog, press the
> > "Start" button, the "Shut Down" option and take the "Restart" option,
not
> > the "Restart in MS-DOS Mode" option. Thanks for all the input
> > from all you
> > guys. Hope to see some of you at Ham-Com this weekend.
> >
> > 73's
> > Alan, N5PA
> >
> > _______________________________________________
> > TRLog mailing list
> > TRLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
> >
>
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
|