TRLog
[Top] [All Lists]

[TRLog] Icom 765 (and other??) filter selection...

Subject: [TRLog] Icom 765 (and other??) filter selection...
From: K2ONP@aol.com (K2ONP@aol.com)
Date: Sun, 8 Dec 2002 16:31:55 EST
In a message dated 12/5/02 5:15:45 AM Greenwich Standard Time, 
kl7ra@blizzard.gcgo.nasa.gov writes:

<< Ron
 
 The Icom 781 will select the menu assigned default filter 
 at a freq change if not commanded to something else.  
 
 I vote to have TRLog not set the filters for a 781.
 
 I don't know the other Icom radios. They may have this
 feature as well. For the 781 it's under the menu Fil and
 allows the oper to select narrow or wide default for each
 mode. 
 
 The menu default is overridden by a filter command. This 
 has not  been a problem in past versions as TRLog always
 selected narrow for both modes which is the normal 
 operating mode for this model.
 
 73 Rich KL7RA   
 
 ___ >>
Rich,
The '765 is different.  It doesn't have a menu for filter selection, so the 
filter selection command is (in my opinion) essential for cw operating,  
Interestingly, because there is no option for a narrow filter on SSB, that 
same command on SSB will lock up radio control. 
Geo

<Prev in Thread] Current Thread [Next in Thread>