I had similar experience with using IC781. setting for my OMNI VI
plus, 4800 Baud.. Several Qs were logged as NONCW. I was on 40M CW
the entire time.
Today, I just tried againwith v6.73, the rig set idle on 40CW and the
display showed mostly 40CW but on occassion would briefly display
40SSB or NONCW or NONSSB. Some times the frequency display would
disappear briefly and then return.
I am a new user to TRLOG and don't know if this was nornal or not.. I
have read some of the archives which showed some problems with the
OMNI interface.
Dave W7DPW
----- Original Message -----
From: "Doug Smith W9WI" <w9wi@earthlink.net>
To: "TRLog" <trlog@contesting.com>
Sent: Tuesday, July 01, 2003 10:27 AM
Subject: [Trlog] Re: Trlog Digest, Vol 7, Issue 1
> On Tue, 2003-07-01 at 11:30, trlog-request@contesting.com wrote:
> > I loaded Version 6.73 and ran Field day this past weekend. I had
a TS-2000
> > connected to COM1 and the TenTec OMNI VI to Com2. I had a major
problem with
> > the computer and the TenTec communicating. Most of the time, they
were not
> > communicating. About 20% of the time, the program functioned
normally. The rest
> > of the time, it was not good.
>
> We used an Omni VI and 6.73 at K4FUN, with 99.9% success. (on rare
> occasions the wrong band or mode would display briefly. We have 12
> "SSB" QSOs in the log - out of just shy of 1,500 - though in fact
the
> rig never left CW mode)
>
> We selected IC761 as the rig and were operating at 2400 baud. K1KY
> (whose Omni it was) did *something* in the rig's setup menus but he
did
> it pretty quickly & I'm not sure what he did.
> --
> Doug Smith W9WI
> Pleasant View (Nashville), TN EM66
> http://www.w9wi.com
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
|