I'm trying to use W9CF's software version 1.03 to integrate my sound card with
TRLog. Machine is a 486 DX2, 50Mhz. 32 Meg RAM. Sound card a Crystal Asonic Pro
supposedly soundblaster compatible. TRLog version 6.71 special small edition,
running under DOS only. Have stacks set to 18,512 in config.sys file.
Have gone through all of W9CF's installation directions as best I understand
them and reached the stage where pressing F10 does indeed give me the Hal
message from 2001. Pressing CTRL-F1 to record a message shows on TRLog that DVP
is recording. Pressing F1 to playback the message gives a few seconds of noise
with the odd click or so; but no audio. The time length of the playback noise
seems the same time length of the message I'm trying to record.
All of this is being done on the PC with no connection to the radio. If I exit
TRLog and restart windows, and then open the sound card window I can record
and playback a message with no difficulty. It's the interface with TRLog that
seems to be the problem.
Can anyone suggest something, please.
tnx, Brian Summers
VE7JKZ
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|