TRLog
[Top] [All Lists]

Re: [Trlog] TR685 available

To: "'Dale Martin'" <kg5u@hal-pc.org>
Subject: Re: [Trlog] TR685 available
From: "J. Edward (Ed) Muns" <w0yk@msn.com>
Reply-to: w0yk@msn.com
Date: Fri, 3 Nov 2006 16:53:59 -0800
List-post: <mailto:trlog@contesting.com>
Sorry about the Alt-D confusion.  That had nothing to do with my testing of
the Ctrl-End, Enter operation in both 6.84 and 6.85 where it works fine for
me.  I do it just like you describe and the active radio follows in both
releases.

My comment about the Alt-D commands is that when I did the first couple of
tests on 6.84 the INACTIVE radio switched frequency rather than the active
radio.  Therefore, I was guessing that maybe my Alt-D commands were messed
up causing that aberration.  But after that, 6.84 worked just fine doing the
operation just the way you describe.  From what I can see, it is working
fine in both 6.84 and 6.85.  I've been testing 6.85 the better part of the
day today.

Good Luck & CU in SS,
Ed - W0YK 

> -----Original Message-----
> From: trlog-bounces@contesting.com 
> [mailto:trlog-bounces@contesting.com] On Behalf Of Dale Martin
> Sent: Friday, November 03, 2006 3:18 PM
> To: 'TRLog Reflector'
> Subject: Re: [Trlog] TR685 available
> 
>  
> > > I haven't yet downloaded 685, but 684 Bandmap CTL-END,
> > ENTER only puts
> > > the call callsign in the callsign field, but does not move
> > the radio.  
> > > I've tried it with both CTL's and on both my Omni 6's on 
> different 
> > > bands.  No joy.
> > > 
> > > Is anyone else seeing this? 
> > 
> > 685 works fine.
> > 
> > 684 (the last release before 685 and what is still posted) 
> works fine, 
> > too ... except for the first few times I did the Ctrl-End, 
> Enter when 
> > it moved the INACTIVE radio.  I could never get it to do 
> that again, 
> > but maybe that's what's happening to you.  In my case, I 
> may have the 
> > Alt-D commands set wrong in LOGCFG.DAT in my 684 testing.
> > 
> > In 685, I have all three Alt-D commands set to FALSE and 
> all the SO2R 
> > features seem to work great so far.
> > 
> > 73,
> > Ed - W0YK
> > 
> 
> Thanks for the note, Ed.  However, this wasn't and 
> ALT-D-related operation
> 
> The cursor was in the main callsign entry field.  I simply 
> did a ctl-end, scrolled down to the desired callsign, and 
> pressed <ENTER>.  The call appeared in the callsign entry 
> field, but the radio was not taken to the callsign's bandmap 
> frequency.  
> 
> I tried it on both radios, in CQ mode, in S&P mode, and nothing.  
> 
> Changing bands (Alt-v/b) works fine.  As does simply typing 
> the frequency into the empty callsign field.  Also, pushing 
> the band buttons on the radio changes radio and TR.  
> 
> I may go back to 6.78....this is an important feature for me 
> because as QRP, I do a lot of S&P and the bandmap gets a lot of use.  
> 
> 
> 
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
> 


_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>