Steve,
I have sent you several older versions.
Try to set BAND MAP CALL WINDOW ENABLE = FALSE or disable band map all
together and see if the problem is gone.
73, Igor UA9CDC
> I'm using v.4.063 beta - newer than what was out there for ARRL CW, I
> think. I
> have it configured for 1 radio. With COM port or LPT port keying, it works
> fine.
> When I switch to Winkey, the following happens:
>
> - CQ mode
> - Finish sending CQ, enter a call in the call window. Hit Enter.
> - Call and exchange are sent.....but the call disappears from the entry
> window.
>
> Tried removing the restart file - that didn't help.
>
> Does Dmitri have older versions archived somewhere ?
>
> 73,
> Steve, N2IC
>
> John Dvoracek wrote:
>>
>> I used a microHAM USB CW Keyer with a WinKey chip SO1R on a Vista Home
>> Premium during ARRL DX and didn't notice any random keying. I thought
>> compared to TR DOS there might be a slight delay between pressing any key
>> and having the CW start, however, this was my first contest in probably
>> over
>> a year, so maybe I was just slow to press the keys. :)
>>
>>> There is also a limitation if you do SO2R: there is currently (at least
>>> as
>> of the version available ~ CQ160) no way to program a cw message to send
>> on
>> the inactive radio.
>>
>> Ouch!
>>
>> What issues did you experience, Steve?
>>
>> 73 -- John
>>
>> _______________________________________________
>> Trlog mailing list
>> Trlog@contesting.com
>> http://lists.contesting.com/mailman/listinfo/trlog
>>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|