Hi:
I switched my coax network over to 100MB twisted pair a couple of months
ago. Saw NO increase in radiated noise. I did see, however, some
impact when I'm running KW on 75 and browsing at the same time. So, the
usual RF chokes at the switch(faster than a hub) and at each network
card. Viola -- no problem.
If you have cable modem or ISDN or ADSL coming your way, go for it.
Good luck.
73,
Jim
wb4gcs@amsat.org
Barry Kutner wrote:
>
> For a change, here's a question not dealing with a problem:
>
> Currently my 2 computer network uses RG58 and BNC connectors
> (10Base2) to connect the Ethernet cards. Thinking of switching to
> RJ45/twisted pair cabling with a hub and I wonder if anyone has
> had any RF problems (either network noise in the radio or RFI into
> the network)?
>
> Tnx/Barry
> --
> Barry Kutner, W2UP Internet: w2up@mindspring.com
> Newtown, PA FRC alternate: barry@w2up.wells.com
>
> --
> WWW: http://www.contesting.com/writelog
> Submissions: writelog@contesting.com
> Administrative requests: writelog-REQUEST@contesting.com
> Problems: owner-writelog@contesting.com
--
WWW: http://www.contesting.com/writelog
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|