WriteLog
[Top] [All Lists]

[WriteLog] Rigblaster PTT w/Writelog

To: <writelog@contesting.com>
Subject: [WriteLog] Rigblaster PTT w/Writelog
From: johnd@tdkt.org (John Desmond)
Date: Fri, 22 Jun 2001 08:52:18 -0500
  I have been trying to get Writelog (V10.20B) to key the rig via COM1
on a laptop via Rigblaster.  The
Rigblaster manual says that as the PC boots, the data lamp should flash
and the rig should key.  I never see this
but I know the COM port works fine as I use it all the time for other
functions.
   I looked at the Rigblaster site and saw what they had as an example
for setting that up.  That did not help.  I
am thinking that maybe the laptop (IBM 770Z Thinkpad) may not activate
the right leads for this function to work.
   Any ideas out there?


73, John  K0TG


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>