WriteLog
[Top] [All Lists]

[WriteLog] WAE QTC - Giving out Candy

To: <writelog@contesting.com>
Subject: [WriteLog] WAE QTC - Giving out Candy
From: marcelo@alternex.com.br (Marcelo Gomes da Silva)
Date: Mon, 13 Aug 2001 11:52:18 -0300
Hi,

We operated the WAE from ZW5B Multi-single, with two computers networked and 
packet. As usual it ran very smooth.

The only problem we had was that the PgUp and PgDn keys didn't work from 
inside the QTC window. Checking the help file I saw that Alt-F9 and Alt-F10 
do the same job, and they work from inside QTC's. It would be nice to fix 
this in the future.

Another nice feature would be configuring cut zeros (T's) for the leading 
time digits. 00:00 could go out much faster as T's. I know this is a polemic 
issue, much talk has been done here in this reflector about the effectiveness 
of it, but for those who use it, it would be a welcome feature.

Also we ran out of disk space during our first attempt of recording the 
sounds, so we gave it up.

Best 73's

Marcelo, PY1KN from the ZW5B WAE CW team



> Hi All,
> 
> Yes like Don I used writelog in the WAE. But for the full 36 hours.
> It worked very well but there were a few problems I encountered. Some of
> them no doubt finger trouble, but the main difficulty with sending QTCs was
> when I entered ALT-S there was no way of changing the keyer speed. This
> meant that when the guy asked me to QRS I tried pressing the page-down and
> it was inoperable. The only way I could get around this was to "cancel" the
> QTC then page down and do an ALT-S again, a bit of a chore when you end up
> sending out over 2000 QTCs, Hi..
> 
> So please Wayne can you make the Page-up/Page-down still work when in the
> QTC send mode?
> 
> And, yes I did hear all you USA guys calling me, but I am in ASIA
> 
> 73 de,
> George 5B4AGC (H2G in contests)
> Web Page http://www.qsl.net/5b4agc
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog



--
Aqui deve entrar sua assinatura.


<Prev in Thread] Current Thread [Next in Thread>