Joe,
Thanks for the tip. It worked just like advertised. There was No Diddle line
in my WriteLog.ini file at all, but I added it to the section you described
and set it to zero diddle=0. That eliminated the diddle and I was able to
force both MARK and Space by listening in an adjacent RCVR and listening to
the MARK tone and then changing the FSK polarity in the Rttyrite window.
The reason I asked the question in the first place was that I finally got on
the air with WL, after having it for quite a while, and was told that I was
Upside down. I like to eliminate those type of problems before they happen.
I would still like to see a command to Force MARK and Force SPACE in these
RTTY programs. But when a work around is available and I should be happy.
Once again thanks for your help.
73/UE
Dave W7DPW
----- Original Message -----
From: <k0bx@qsl.net>
To: "Dave W7DPW" <w7dpw@home.com>; "writelog" <writelog@contesting.com>
Sent: Saturday, October 06, 2001 8:57 PM
Subject: Re: [WriteLog] No Diddle
> Add diddle=0 to turn off diddle, my is on.
> Joe K0BX
>
>
> [Rttyrite]
> FontHeight=23
> Port=1
> Speed=0
> diddle=1
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|