WriteLog
[Top] [All Lists]

[WriteLog] cw de-coder

To: <writelog@contesting.com>
Subject: [WriteLog] cw de-coder
From: gbaron@home.com (Gil Baron)
Date: Wed, 07 Nov 2001 19:26:08 -0600
--=====================_456331089==_.ALT
Content-Type: text/plain; charset="us-ascii"; format=flowed

At 18:38 11/7/2001, Roger F. Wise wrote:
>Hi again folks.  Thanks for all the help so far.  I have covered all of the
>ground that you folks informed me of before.  Here is the problem when
>looking into the VOLUME CONTROL.  I open this window from the speaker on
>task bar.  Then go to options.  Under options I go to PROPERTIES. From there
>I find PLAYBACK/RECORDING/OTHER.  Under each one of these different windows
>I have listed below with box's to check are 1. Recording Control. 2. Wave
>Record.3.Synthesizer 4. CD 5.Mic 6.Modem 7.TV Tuner.  There is 'NO LINE IN
>LISTED'  This has me  pulling my hair out by the roots and to top that off I
>am a Barber by trade. hi.   So folks where do we go from here?  Roger KI0F

I AM GOING OUT ON A LIMB HERE THAT MAY BE CUTOFF. These are my opinions and 
YMMV but here it is.

Perhaps your sound card has no line in. If it has no line in, use the 
microphone input. That would be the one to adjust too.
If there is a line in on the card (many laptops do not have it and perhaps 
some desk tops) then you have bad sound card software. Update it.

Keep trying and if you can decode PSK31or any other thing like SSTV then 
you have ti set up exactly the way you want it to do the CW. The problem 
may be partly that the CW decoder in WRITELOG is not very good. It requires 
you to find a signal in a VERY NARROW range of speeds. If you do then it 
decodes well as it does not have to worry about adjusting to speed.
I would not even begin to try to use this in a contest. It is worthless for 
that in my opinion. IT is a nice toy, nothing more.

GET QUICKMIX to save your settings and quickly restore them once you have 
them. IT IS FREE.


WriteLog is a good logging program but is far inferior as a demodulator for 
all modes except rtty and is not even close to MMTTY in that mode either.

The PSK31 decoder is acceptable but barely as the width of the display 
(FREQUENCY BANDWIDTH) is FAR too narrow. That is also pretty much true in RTTY.

FOR RTTY use MMTTY.
FOR SSB , nothing needed.
FOR PSK31 use the built in, it is all you have.  Fortunately there are few 
contests.
FOR CW use your head. It is FR superior to what you can do with WriteLog OR 
ANY OTHER DECODER in a contest.

>
>_______________________________________________
>WriteLog mailing list
>WriteLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/writelog

Gil Baron http://members.home.com/gbaron
W0MN 44.08208 N 92.51263 W 1055'
"Baila como nadie te ve"

--=====================_456331089==_.ALT
Content-Type: text/html; charset="us-ascii"

<html>
At 18:38 11/7/2001, Roger F. Wise wrote:<br>
<blockquote type=cite class=cite cite>Hi again folks.&nbsp; Thanks for
all the help so far.&nbsp; I have covered all of the<br>
ground that you folks informed me of before.&nbsp; Here is the problem
when<br>
looking into the VOLUME CONTROL.&nbsp; I open this window from the
speaker on<br>
task bar.&nbsp; Then go to options.&nbsp; Under options I go to
PROPERTIES. From there<br>
I find PLAYBACK/RECORDING/OTHER.&nbsp; Under each one of these different
windows<br>
I have listed below with box's to check are 1. Recording Control. 2.
Wave<br>
Record.3.Synthesizer 4. CD 5.Mic 6.Modem 7.TV Tuner.&nbsp; There is 'NO
LINE IN<br>
LISTED'&nbsp; This has me&nbsp; pulling my hair out by the roots and to
top that off I<br>
am a Barber by trade. hi.&nbsp;&nbsp; So folks where do we go from
here?&nbsp; Roger KI0F</blockquote><br>
I AM GOING OUT ON A LIMB HERE THAT MAY BE CUTOFF. These are my opinions
and YMMV but here it is.<br><br>
Perhaps your sound card has no line in. If it has no line in, use the
microphone input. That would be the one to adjust too.<br>
If there is a line in on the card (many laptops do not have it and
perhaps some desk tops) then you have bad sound card software. Update
it.<br><br>
Keep trying and if you can decode PSK31or any other thing like SSTV then
you have ti set up exactly the way you want it to do the CW. The problem
may be partly that the CW decoder in WRITELOG is not very good. It
requires you to find a signal in a VERY NARROW range of speeds. If you do
then it decodes well as it does not have to worry about adjusting to
speed.<br>
I would not even begin to try to use this in a contest. It is worthless
for that in my opinion. IT is a nice toy, nothing more.<br><br>
GET QUICKMIX to save your settings and quickly restore them once you have
them. IT IS FREE.<br><br>
<br>
WriteLog is a good logging program but is far inferior as a demodulator
for all modes except rtty and is not even close to MMTTY in that mode
either.<br><br>
The PSK31 decoder is acceptable but barely as the width of the display
(FREQUENCY BANDWIDTH) is FAR too narrow. That is also pretty much true in
RTTY.<br><br>
FOR RTTY use MMTTY.<br>
FOR SSB , nothing needed.<br>
FOR PSK31 use the built in, it is all you have.&nbsp; Fortunately there
are few contests.<br>
FOR CW use your head. It is FR superior to what you can do with WriteLog
OR ANY OTHER DECODER in a contest.<br><br>
<blockquote type=cite class=cite cite>&nbsp;<br>
_______________________________________________<br>
WriteLog mailing list<br>
WriteLog@contesting.com<br>
<a href="http://lists.contesting.com/mailman/listinfo/writelog"; 
eudora="autourl">http://lists.contesting.com/mailman/listinfo/writelog</a></blockquote>
<x-sigsep><p></x-sigsep>
<font face="Courier New, Courier">Gil Baron
<a href="http://members.home.com/gbaron"; 
eudora="autourl">http://members.home.com/gbaron</a><br>
W0MN 44.08208 N 92.51263 W 1055'<br>
&quot;Baila como nadie te ve&quot; <br>
</font></html>

--=====================_456331089==_.ALT--


<Prev in Thread] Current Thread [Next in Thread>