WriteLog
[Top] [All Lists]

[WriteLog] Entry Window Question

To: <writelog@contesting.com>
Subject: [WriteLog] Entry Window Question
From: DieselCar@aol.com (DieselCar@aol.com)
Date: Mon, 12 Nov 2001 14:01:57 EST
gbaron@home.com writes:

<< At 12:30 11/12/2001, DieselCar@aol.com wrote:
 >k7jj@arrl.net writes:
 >
 ><<
 >  When CQ'ing (Run), I select the calling station with the mouse and the 
call
 >populates the Callsign field. However, the cursor jumps to the RST field. If
 >I hit Enter at this point I expect the call and rst to be sent. Instead the
 >qsl/qrz message is sent.
 >. . . .>>
 >
 >Dave,
 >
 >Try the following:
 >1 - on WriteLog main window, click ENTRY
 >2 - click ENTRY SENDS EXCH/QRZ
 
<< 
 This is true , BUT the cursor jumps out of the Call field when you use the 
 mouse to select and enter the call,NOT GOOD, and now you have to use the 
 exchange key, not enter. It should wait for a space bar before it leaves 
 the call field as it does with a manual entry.
 
 
 This is something that should be fixed as soon as possible. It is not 
 logical to work this way.
 >>
 
Gil,

By using the INSERT key, the last hi-lited call will be captured, placed in 
the CALL ENTRY filed and sends the exchange. This is one way that one is 
assured that the cursor stays in the CALL field until one moves it. 

Rick W4UEF

 >When ENTER is hit wid the cursor is in the CALL window, it will send the
 >exchange. That is, I have my exchange on F10. When the cursor is in any 
field
 >other than CALL then F3 (%r%d TU GL QRZ? de W4UEF TEST%r%e) is sent. Since 
my
 >exchange is on said keys then the following is in WRITELOG.INI:
 >[Configuration]
 >
 >SendCallExchangeKey=10
 >QrzFunctionKey=3
 >
 >Gud luck
 >   ue Rick W4UEF


<Prev in Thread] Current Thread [Next in Thread>