WriteLog
[Top] [All Lists]

[WriteLog] tnc and packet window

To: <writelog@contesting.com>
Subject: [WriteLog] tnc and packet window
From: carsten.steinhoefel@web.de (carsten.steinhoefel@web.de)
Date: Wed, 13 Mar 2002 14:13:20 +0100
Hi Dirk,

the problem is that the WL packet window does not allow to input the
ESC character/sequence required by your firmware. It is meant to be
run with a firmware that has a CMD: prompt.

I think the standard TNCs can be switched to use that mode (sri, can't
remember the name - I am no packet guru). In Europe this has the big
disadvantage that it does not support DAMA.

A good idea for the next version would be a menu item to send the
ESC character (ASCII 27 I believe) to the TNC from the packet window.

vy 73 Carsten, DL1EFD

P.S. Glad I run unassisted;-)

"Dirk Desloovere" <d.desloovere@skynet.be> schrieb am 13.03.02:
> Dear, 
> 
> I try to run a random tnc with writlog V10.29 using the packet window.
> This tnc runs errorfree with Logger 8.07.
> The tnc is is pwg tnc 2 using Frimware Version 2.7 software.
> 
> When I start the packetwindow in WL I can see the start protocol with version 
> and the checksum in the window. So the port (com 1 in my case) is 
> communicating with the tnc.
> 
> But when I want to give a command with  such as  esc  i on4adz , or esc c 
> on0ck   by using the escape key the packet window closes.
> So I am unable to command this tnc.   
> 
> What is wrong ? 
> 
> 
> Tnx  
> 
> ON4ADZ
> 
> 
> 
> 
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> ---
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog


________________________________________________________________
Keine verlorenen Lotto-Quittungen, keine vergessenen Gewinne mehr! 
Beim WEB.DE Lottoservice: http://tippen2.web.de/?x=13



<Prev in Thread] Current Thread [Next in Thread>