WriteLog
[Top] [All Lists]

[WriteLog] tnc and packet window

To: <writelog@contesting.com>
Subject: [WriteLog] tnc and packet window
From: jbrannig@optonline.net (Jim Brannigan)
Date: Wed, 13 Mar 2002 08:43:15 -0500
Use HyperTerminal (Windows Communication group) to initialize your TNC.
This will enable the CMD: prompt.  Exit HyperTerminal and start W/L.

Jim


> Dear,
>
> I try to run a random tnc with writlog V10.29 using the packet window.
> This tnc runs errorfree with Logger 8.07.
> The tnc is is pwg tnc 2 using Frimware Version 2.7 software.
>
> When I start the packetwindow in WL I can see the start protocol with
version and the checksum in the window. So the port (com 1 in my case) is
communicating with the tnc.
>
> But when I want to give a command with  such as  esc  i on4adz , or esc c
on0ck   by using the escape key the packet window closes.
> So I am unable to command this tnc.
>
> What is wrong ?
>
>
> Tnx
>
> ON4ADZ



<Prev in Thread] Current Thread [Next in Thread>