Alan, I always get these characters on my screen. They appear at the beginning
of a transmission (and on rare occasion a few extra characters at the end).
However,
they are not actually transmitted. These "extra" characters were not being
decoded
by the DXP-38. Do make double sure, I check with transmission with my other
radio. It's annoying, but those extra characters are not being transmit. If
you were
to run dual receive with an external TNC and your radio MONITOR on, the TNC
in the 2nd RTTY window will show you exactly what is being transmit.
73, Don AA5AU
----- Original Message -----
From: "Alan Realey" <alan.r1@comcast.net>
To: "Writelog Reflector" <Writelog@contesting.com>; "Don Hill AA5AU"
<aa5au@bellsouth.net>
Sent: Tuesday, January 07, 2003 7:32 AM
Subject: Re: [WriteLog] MMTTY 1.63 Problem Summary
> In addition to the original problem, I experienced a possible "bug" (??)
> with WL, MTTY 1.63 and Windows 98 when using the F keys. About 25% of the
> time, upon depressing an F key, the first 2 to 3 characters that were sent
> appeared as "junk" characters on my screen. I have no reason to suspect that
> those characters weren't sent.
>
> Not sure if anyone else had this problem, as this is the first time I have
> used WL. I had a great time in the contest too. I have much to learn, but
> with all the help offered by this great group of people, I know that I will!
>
> Happy New Year to all,
>
> Al WB2JEP
>
> ----- Original Message -----
> From: "Don Hill AA5AU" <aa5au@bellsouth.net>
> To: "WriteLog Reflector" <Writelog@contesting.com>
> Sent: Monday, January 06, 2003 10:46 PM
> Subject: [WriteLog] MMTTY 1.63 Problem Summary
>
>
> > I received quite a few responses on this one. Seemed a lot of people
> > had the same problem. The post from Bill, W9OL, showed he had the
> > problem with MMTTY 1.63 stand alone. Everyone that replied was
> > running MMTTY 1.63.
> >
> > I also received this directly from Hisama, 7L1IOU, who gave me permission
> > to post to the reflector:
> >
> > > Hi Don and John
> > >
> > > I also had the same problem.
> > >
> > > I prepared for roundup, exchanged new sound card
> > > and upgraded to MMTTY163.
> > >
> > > I think that MMTTY163 is the cause.
> > >
> > > It happened similarly not only by Writelog SO2R
> > > but by RTCL(by JK1IQK).
> > >
> > > by resource meter of Win2k, CPU load pointed to 100%
> > > in between key up.
> > >
> > > The solution was restoring to MMTTY162 and
> > > sound card which verified.
> > > Watching CPU meter,
> > > the MMTTY parameter was changed and load was lowered.
> > > It returned to SO2R after adjustment.
> > >
> > > PC is a AT cloen PII 260MHz, Windows 2000, 128MB Mem
> > >
> > > 73, Hisami 7L4IOU
> >
> > So it appears to be a problem with MMTTY version 1.63. Although I've
> > had reports that 1.63 copied much better than 1.62, I didn't see it.
> Personally,
> > I thought it was about the same. I can only notice by how it compares
> with
> > the DXP-38 which runs in a separate RTTY window on both computers.
> > MMTTY ran slightly better as usual, but on occasion, the DXP-38 copied
> > better (that's the reason we do dual receive, right?).
> >
> > I plan on going back to 1.62, but I'm not sure what all that entails. I
> don't
> > know if you can simply re-install 1.62. I'll ask Hisami how he did it.
> >
> > I will reply directly back to all that replied, but it may take some time.
> Some
> > of you asked other questions that I would like to comment on.
> >
> > Was a hell of a contest, eh? Ever seen 80M that good for a RTTY
> contest???
> >
> > 73, Don AA5AU
> >
> >
> > http://www.aa5au.com
> > http://www.geocities.com/writelog
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
>
>
>
|