WriteLog
[Top] [All Lists]

[WriteLog] Setting split from Band Map

To: <writelog@contesting.com>
Subject: [WriteLog] Setting split from Band Map
From: Georgek5kg@aol.com (Georgek5kg@aol.com)
Date: Mon Mar 3 10:43:58 2003
In a message dated 3/3/2003 3:44:53 AM Greenwich Standard Time, 
djsatty@comcast.net writes:

> During ARRL DX SSB test, if I entered a call into the log window from the
> packet callouts, it would
> set the exciter to receive freq and split to the xmit freq.  However, if I
> entered a call into the log window
> from the Band Map, it would NOT set the split freq.  Anyone have the same
> problem.  This occurred
> when the split freq was announced on packet.
> 

Dave, I also found this to be a problem.  There is also a problem in posting 
a split frequency spot.  Sometimes the QSX frequency is not entered into the 
outgoing packet spot posting, and sometimes it is.  It seems inconsistent.

I also find that I have to click on the packet callout several times for the 
entry to cause the radio to switch to the proper frequency.  If it is a split 
callout, such as on 40 and 80, I have to click many times to get the radio to 
take the split.  I use a Ic756Pro2, and I suspect this has something to do 
with the timing of the data comm from the computer to the radio.  I have 
tried both 4800 baud and 9600.  9600 seems to be somewhat better than 4800, 
but it is even tempermental, and I find myself clicking on the packet spot 
sometimes a dozen times or so in order to get the radio to switch.  Does 
anyone else experience this?

73, Geo...

George I. Wagner, K5KG
Productivity Resources LLC
941-312-9450
941-312-9460 fax
201-415-6044 cell



<Prev in Thread] Current Thread [Next in Thread>