Hi Bill,
I have found the same "error" in WL. In the WL manual I found following:
-----
Individual contest modules can customize WriteLog's default behavior. The
default is:
1) Any string with both digits and letters is the call sign.
2) A string with only letters is placed into the entry field that contains
letters that is wide enough for what you have typed
3) A string with only digits is placed into the narrowest entry field
that contains digits and is wide enough.
4) The RST sent and received fields are never automatically filled this way
-----
The CIS area code such as RU11 is a call sign ;-)
I think the autor of the CIS module don't customize the default behavior. A
workaround
is to place the area code from hand into the RCVD field.
But there is another error in the CIS module:
All area codes with 0 (zero) like RU01 or TM03 dont work. I have found the
reason for this behavior in the cisdx.ini file.
In place of the zero there is the letter O. You can type RU<letter>O3 or you
must edit the ini file.
cu in contest.
73 for now
Bernd, DC3HB
> It seems that in the CIS RTTY contest, the CIS locations such as RU11,
> etc, are not clickable. Clicking on them places them in the Call
> field. It's the same with or without the hyphen. Is that normal, or
> is there a workaround?
> Serial numbers seem to click ok.
> --
> Bill W6WRT
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|